HS-ML1040

Professional LED Backlight Monitor for surveillance.
Front plastic / back metal case.
Video input BNC x 2 / VGA x 1 / S-Video x 1(w/o RS485).
Video output BNC x 2.
Audio Input phone jack x 2.
Audio speaker x 2.
Compatible with VGA(640X480).
Full / Under / Over scale mode.
Picture-In-Picture feature that allow multi-picture display.
High brightness level and contrast ratio with viewing super wide angle.
Built-in 3D comb filter and 3D de-interlace for crispy picture performance.
Fast response time and refresh rate without time lagging.
Provides 6500°K and 9300°K color temperature selection for user's preference.
VESA standards (75mm X 75mm) bracket.
Built-in RS485 (optional) : operate PTZ dome or camera / DVR and monitor group management by remote controller (Patent No. M408892).

Description

Model	HS-ML1040
Button Control	Power / OSD Control / Source
Display Resolution	800(W) x 600(H)
Active Area	211.2(H) x 158.4(V)mm
Dot Pitch	0.264 (H) x 0.264(V)mm
Display Ratio	4:3
Brightness (Central)	300cd/m2 (*1)
Contrast Ratio	500 :1
Viewing Angle	Left 75° / Right 75° / Up 50° / Down 60° CR>10
Response Time	30ms
Input Voltage	DC12V
Input Signal	1Vp-p composite video
Input Impedance	75 ohm
Output Impedance	75 ohm (Auto Termination)
Scanning System	NTSC: 525 lines, 60 fields / sec ; PAL: 625 lines, 50 fields / sec
VGA Input	15 pin D-SUB connector x 1
Video Input/ Output	BNC x 2 / BNC x 2 Looping Output Auto Termination
Audio Input(L/R)	3.5mm Phone Jack x 2
RS485	optional
RS485 jack	Pin jack x 2, +/-(w/o S-Video)
Protocol	Pelco P / Pelco D / customized protocol
Control device	operate PTZ dome or camera / DVR and monitor group management by remote controller
Control ID	PTZ dome or camera 1 ~ 255 / DVR 1 ~ 255 / Monitor 1~255
DC power out	Pin jack x 2, 5V / 500mA / GND
S-Video	4-pin DIN connector x 1(w/o RS485)
Speaker	1W + 1W
Power Consumption	11W
Operating Temperature	-10℃ ~ 50℃ (14℉~ 122℉)
Storage Temperature	-20℃ ~ 60℃ (-4℉ ~ 140℉)
Dimension	261(W) x 223(H) x 42(D)mm
Weight	N.W./ G.W.: 1.7kg / 2.9kg